Each time you want to access the settings on your router. However, the tool to change the settings in a router is to access the device page in the local network. This is usually done by entering the local IP address in a browser and pressing the Enter key. Sorry, there is no default IP “used by all routers. Therefore, if you forget or lose the IP address of your router, it can be very annoying when you want to change its settings.
Manual and Device Check
First, check the router’s manual and / or router if you have a local IP address.
Routers typically detail the IP address in the grid, and some routers have a default SSID name and IP address and a useful information card in the unit itself. If you find an address in any of them, you can use the address to access your router’s settings.
Checking IP Address with IPConfig In this case, you don’t need to worry! There are many ways to find information without any documentation available.
If you are currently connected to the router you want to learn IP, you can find it from the command line.
To access the command line, click the Start button, type cmd, and then click Command Prompt .
Type the sentence that appears in the console: ipconfig. Pressing enter will display a lot of information. Don’t think about remembering all this!
You are looking for the Default Gateway IP address, which will be your router’s IP address. This is defined as default gateway as a device that receives your computer from a network.
Check IP Address with Adapter Settings
You can also check the IP address of your router with adapter settings.
First, make sure you are connected to the correct router.
Then, right-click the Internet connection status icon in the taskbar and click ges Open Network and Sharing Center.
You may need to click the small up arrow to the left of the symbols to see the Internet status icon.
Checking the IP Address with the search engine
If you know the model of your router, you can search online to find the IP address. Typically, all routers of the same model use the same local IP address. To search for your router’s IP address, type as much information about the router as you can in a search engine. If you find a model name, this will help a lot. Then add ip address to the end and press Enter. Check the results of people who want the same question you have.