Hey there! If you’re struggling with your boAt Wave Call 2 charging problem, you’re not alone. I recently faced the same issue and spent hours figuring out the best fixes. Whether your smartwatch won’t charge, shows charging error, or just refuses to power up, I’ve got some tested solutions that worked for me.
Let’s dive into the troubleshooting steps and get your boAt Wave Call 2 back to full battery life!
Why Is My boAt Wave Call 2 Not Charging?
The first time I noticed my boAt Wave Call 2 not charging, I panicked. Was it the charging cable, the dock, or something worse? After some trial and error, I realized several things could cause this issue:
-
Loose connection – Sometimes, the pins don’t align properly.
-
Dirty charging port – Dust or sweat can block the contacts.
-
Faulty charger or cable – Not all USB adapters work well.
-
Software glitch – A simple restart might fix it.
If your boAt Wave Call 2 stops charging suddenly, don’t worry—let’s fix it step by step.
Fix 1: Clean the Charging Port & Pins Properly
This was the first thing I tried, and it worked! Over time, sweat and dirt build up on the charging pins of the dock and the back of the watch. Here’s what I did:
-
Turned off the watch (just to be safe).
-
Used a soft, dry cloth to wipe the back of the watch.
-
Gently cleaned the dock’s metal pins with a cotton swab dipped in rubbing alcohol.
-
Let it dry completely before trying to charge again.
This small step fixed my boAt Wave Call 2 charging issue instantly. If yours still doesn’t charge, move to the next fix.
Fix 2: Check the Charging Cable & Adapter
Not all chargers are equal! I made the mistake of using a low-power adapter at first, and my watch barely charged. Here’s what you should do:
-
Use the original boAt cable – Some third-party cables don’t fit well.
-
Try a different USB adapter – Preferably a 5V/1A or 5V/2A one.
-
Test the cable on another device – If it doesn’t work, replace it.
I switched to a better adapter, and my boAt Wave Call 2 started charging normally again.
Fix 3: Restart or Reset Your boAt Wave Call 2
Sometimes, a simple restart can solve charging problems. Here’s how I did it:
-
Hold the power button for 10 seconds until it reboots.
-
Try charging again after the restart.
If that doesn’t help, a factory reset might be needed (but backup your data first!).
Fix 4: Inspect for Hardware Damage
If none of the above worked, I checked for physical damage. A bent charging pin or water damage could be the culprit.
-
Look for bent pins – If any are misaligned, carefully straighten them.
-
Check for moisture – If the watch got wet, leave it in rice for a few hours.
Luckily, mine had no damage, but it’s worth checking!
Keep Your Watch Charging Smoothly
After trying all these fixes, my boAt Wave Call 2 charging problem was finally solved! The key was cleaning the contacts and using the right charger.
If your watch still won’t charge, it might be time to contact boAt customer support for a replacement.
Hope this guide helps—let me know in the comments which trick worked for you!